Metal Casting Zone Info Blog

Kent Klein asked:


The most noticeable item in any backyard foundry is the furnace. This is no surprise really, because without the furnace the entire metal casting operation would be nonexistent. The furnace can take really any size and form depending upon the need and budget of the metal caster. What really makes home metal casting furnaces really unique is how many of them come into creation.

Sure there are plenty of companies that will gladly sell furnaces for the hobby metal caster and while this can be a viable solution to your furnace needs many metal casters prefer another method.

Making your own furnace is not as far fetched as it may seem and if you already a Do It Yourselfer, chances are you will have the needed skills and tools in your workshop or garage already. There are a variety of reasons why people make their own furnaces. The most common reason is fulfilling a need.

Many hobbyist and metal workers find out, to their dismay, that the local commercial foundries can not make the needed part or if they do, they feel the need to charge an outrageous sum. Not to mention the fact that the traditional methods of metal casting is quickly becoming forgotten as the industry turns to electric furnaces. So many hobbyists find that constructing their own furnace is an absolute necessity and a great way to preserve a piece of craftsman history. The artisans who use metal casting to create sculptures and other pieces find that making their own furnace grants them a greater amount of control over the entire process. This is actually how many people get into metal casting to begin with.

Most likely, your first furnace is going to be a small and rather simple one. There is really no need to run before you can walk when it comes to something that will be using intense heat and melting iron which can be rather dangerous.

Home made furnaces have been constructed from coffee cans to trash cans or sheet metal welded together. While there are a few components that really should be bought like the retractor to line the furnace walls which should be resistant to high temperature for a prolonged period of time along with special connectors and regulators, most of the furnace can be created in your own home. You should be able to find most of the components that you can not make at hardware stores or plumbing supply stores for relatively cheap.

Along with the furnace parts you will also need to buy a crucible which will hold the metal as it melts along with the appropriate tools that you will use to handle the crucible. While you are at it you might as well buy all the safety equipment like gloves, protective eye wear, and leather shoes. There is other safety equipment that you will need depending on the type of work and the type of furnace you are going to make.

Most likely, your first furnace is going to be a simple cupola variation. The cupola furnace which is going to resemble a smoke stack is a simple design and is relatively easy to make for anyone with mild craft skill. This type of furnace will not require a crucible since you will be able to pour the molten metal from the furnace itself into a ladle that can then be poured into the mold.

DIY casting furnaces are a great way to connect yourself with your metal casting work giving you more control. While building the furnace can be complicated at first, once you delve into it you will find the experience enjoyable and fascinating.

Bronze Metal Casting

Kent Klein asked:


Metal Casting provides the hobbyist with a great way to create personalized parts and pieces that may otherwise be unattainable or far too expensive. Casting is an ancient art that is still is use to this day by major industries to artists to those with backyard foundries. This skill is a valuable one that promises to provide the hobbyist with a rewarding past time. Most hobbyists begin their casting careers with a modest sized furnace to fit their most basic needs. Within a few months, the hobbyist might find that the furnace has grown and that they are casting at every chance that comes along. Don’t worry, this is completely natural.

To say that metal casting is addictive is an understatement. Metal casting provides a way for an idea to materialize through molten metal. This is perhaps one of the greatest parts of the entire metal casting process like seeing what was once just sketches solidify from liquid iron, or whatever metal is used. All the metal caster needs is an idea and red hot liquid metal.

The furnace is the pride and joy for the metal caster. Most will construct their own furnace tweaking the design here and there to better suit their needs. Many home foundries are based on home made furnaces and if constructed correctly can prove to be highly effective. The crucial part of the furnace is the furnace torch. The torch brings the heat, incredibly high heat, and without it that chunk of metal would just sit in the crucible and never see life as something new and exciting. Except as a paper weight; a very ugly paper weight.

When searching for an appropriate casting torch the hobbyist will need to take several things into consideration. The size of the furnace, and what metals you plan to use are chief among the considerations. Many casters will use a torch that uses propane gas as it provides enough pressure and heat to melt most metals. If the hobbyist plans to use natural gas like the kind that is provide in households they may find that the pressure is just not enough and the desired temperatures will not be reached. The same is true for Butane. While natural gas and Butane can be used, propane seems to yield the best results. Oxyacetylene torches are a favorite with many casters especially for casting iron.

Price is yet another consideration. While it may be possible to rig a casting furnace it is not always advisable. Torches can range in price from $40 to several hundreds of dollars depending upon the size, the use, and accessories.

Many jewelers are able to use small independent casting torches but when dealing with metal casting in furnaces you will need to use a torch that can be mounted and used in such a fashion. Many think that just because you need a furnace torch you are going to need a large furnace. This is simply not true. A small furnace and furnace torch can produce enough heat to melt aluminum, iron, and a number of other metals. One of the furnaces functions is to help the flame reach optimum temperature and in the case of Reverberatory Furnaces, a furnace torch is an absolute requirement.

Casting torches can be found in some hobby shops and in hardware stores. Several online shops also sell torches for the hobby metal caster. When buying a torch hobbyist should shop around in order to find the best deal. Always use caution when dealing with a furnace torch.

Aluminum Metal Casting

Kent Klein asked:


In Metal Casting, the type of furnace you have at your foundry, or workshop determines a lot of the work you can or can not do. Many metal casters enjoy making their own furnaces and have done so quite successfully. The plans for home made furnaces are eagerly shared among the enthusiasts so finding blueprints and instructions should not be difficult. But before you rush off to find the blueprints you may want to take time to learn about the types of casting furnaces available to help determine which one will suit your needs. This is not saying that you should only have one furnace at any given time, but this way you will know what project will work best for which furnace.

Cupola

Cupola furnaces are among the most popular with backyard foundries. Many casters construct their own cupola which proves to be cost effective and highly efficient if done properly. Since cupola furnaces can achieve high melting temperatures they are primarily used for the melting of iron and bronze, though aluminum can also be melted when attention is paid to keeping the temperature low. The primary fuel source for cupola furnaces are coke using limestone for flux.

By not using a crucible, the Cupola furnace is able to melt the metal at a faster rate. While individual designs of these furnaces differ due to varying resources and design ideas, the basic component of a cupola furnace is the same. The cupola furnace must be elevated above the ground and installed with a drop bottom usually hinged, which will allow the excess metal, fuel source, and other waste to drop from the furnace. The tap hole and shaft which will allow the molten metal to flow from the furnace and into the ladle and air shafts are also required. A slag tap hole can be placed on the furnace usually in the back, higher then the tap hole, which will allow the slag to flow out easily.

With most small home foundries, the cupola furnaces are preferred over that of other furnaces for its high melting rates and for how easily the construction of such a furnace can be.

Reverberatory

The Reverberatory Furnaces are commonly found in industrial plants but there have been quite a number of home grown foundries that have used this furnace type with much success. The basic idea of a Reverbeatory Furnace is to use the heat reflecting off a surface, usually brick, to heat the metal, which is aluminum in most cases. This way, the metal does not come into contact with the fuel or the flame. This process is also used in Puddling Furnaces. The name Reverberatory and Puddling are often used interchangeably. By placing the metal in a shallow depression and then directing an intense flame over that depression and to the wall, the heat rebounds to melt the metal. Many casters will adjust the length of the flame since a longer path will mean that the heat will be more intense.

There are many designs for the reverberatory furnace, all of which will include exhaust ports and the rear of the furnace must be able to withstand the intense heat and be able to bounce it back into the chamber.

Bronze, aluminum, tin, and many other ores can be melted in a reverberatory furnace all depending on the construction of the actual furnace and the heat of the flame. This type of furnace has been around since at least the Middle Ages and was used primarily for bronze work.

Electric Arc

Electric Arc furnaces are normally used in Industrial foundries. Most hobby casters do not use these furnaces due to cost, space issues, and a general inconvenience. There are two forms of the electric arc furnace, the direct and indirect.

The direct arc has three electrodes which are used to heat metal by way of the arc. This creates an incredible amount of heat and so water jackets and other cooling devices will be needed for operation.

The indirect arc just uses one electrode and works in much the same way as the direct arc furnace.

Electric Induction

Electric Induction furnaces are becoming all the more popular with large industrial size foundries that enjoy the clean burning and efficiency of an electrical furnace. Copper coils surround the crucible with the metal inside which can reach extremely high temperature suitable for melting most metals.

Rotary

The Rotary style furnaces are hailed for their ease of use being fully or at the very least partially automatic. These furnaces tend to be harder to construct though there are resources and companies online that sell rotary furnace.

The different furnace types do affect the quality of the work being produced, so it is important to keep that in mind as you cast. With a little trial and error, you should find the perfect furnace to fit your needs so you can start building one of your very own.

Metal Casting Zone

Kent Klein asked:


From the earliest attempts to make lead into gold and to the more modern use of making those empty soda cans into a replacement part for that model plane, crucibles have been an absolute necessity in metal casting.

Crucibles are placed inside of the furnace where the metal is placed and then melted. The crucible then collects the melted alloy which will then be poured into the model. Since the crucible will be holding metals melted at extremely high temperatures the crucible will need to be created from very strong material. The durability of the crucible will add a certain aspect of safety to the metal casting process. Using a crucible that is low in quality can result in shattering, which, let’s face it, is never ever a good thing.

Any crucible at any given moment can shatter or fail which is why using appropriate safety gear at all times is so important. In order to handle the crucible which will be red hot you will need to wear boots, jeans, and gloves. The tools for lifting the crucible from the furnace and then the tool for tilting the crucible so that the molten metal will pour easily into the mold will vary crucible from crucible. Those that make their own crucible will be able to create them in an identical manner so the same tools can be used. The idea of these tools is to make sure that the crucible can be safely and securely lifted and poured. You will never want to directly touch a hot crucible, even with gloves.

For those that either can not or will not make a home made crucible can buy a crucible and tools from any of the online stores. A common material for crucibles is graphite as it can withstand the molten metal. Many who cast metal will prefer using graphite crucibles as it can prevent impurities from being introduced into the gold or other precious metal being used. Another option is the Silicon Carbide crucible.

Silicon Carbide is a great though expensive alternative to the graphite crucible. A crucible made from Silicon Carbide can handle rougher treatment then graphite so if you are not particularly gentle with your toys then this is a terrific option.

Yet another option available to the home foundry is creating your very own crucible. Many don’t really recommend this since commercially created crucible tend to be more durable and will instill a bit more confidence in the casters. It is, however, possible to create a crucible as many of us will at one time or another.

If you plan on creating your own crucible then keep this in mind. There are a few areas of home metal casting where you should not cut corners, these definitely include crucibles. The crucibles job is the transportation of incredibly hot molten metal which can easily exceed 1,000 degrees Fahrenheit and is really the only thing between you and this metal. When you plan on melting metals with extremely high melting points you will need crucibles made from material that will cost a little extra. Spend that money and do so gladly since it is just a small price to pay for your safety.

Crucibles should only be used to melt one kind of metal. If you have always melted aluminum but decide to try melting brass then you will need a new crucible. This is done for safety reasons. Remember, a crucible is not meant to last forever. Always check your crucible before use to make sure there are not cracks or imperfections if there are then do not use that crucible.

Crucibles come in a variety of sizes and can be made from a variety of materials. It all depends on the type of metal to be used and the size of the job. Never skimp on the price of this tool and always follow safety guidelines and use common sense when dealing with a hot crucible.

Metal Casting

Kent Klein asked:


Cupola furnaces are the easiest and most economical furnace to work with for the small foundry owner. Hobby metal casters are always on a look out for a cheaper alternative which will provide safety and yield quality results and the cupola furnace delivers all this.

The common appearance of a cupola furnace is that of a smokestack. The furnace can be of nearly any size which is perfect for backyard metal casters. Commonly, the cupola furnace is supported on four legs with a drop bottom to remove any waste from the furnace. This type of furnace does not use a crucible so the metal caster will place the metal to be melted inside of the furnace. The furnace is fitted with a sprout and runner to pour the molten material which is called a taphole. Sometimes cupolas are fitted with a way for slag to be removed. The slag tapholes are located near the back of the cupola a little higher then the other taphole. The refractory used in cupolas are usually brick with the bottom being clay and sand as this is just temporary anyways.

Cupola casting usually involves working with iron and bronze, though other alloys like aluminum can be melted as well.

The common fuel source for cupolas is coke with limestone acting as a flux. Air can be pumped in to increase the burning of the coke. When the coke is hot enough the alloy is introduced in the top of the cupola. Some will place the alloy then fresh coke and then more alloy. The molten alloy will drip through the coke to collect in the well near the taphole. When the level of the molten alloy is high enough, the taphole is opened and then alloy runs into a ladle. When enough has poured the taphole is closed with the use of a refractory plug. Remember, cupola casting does not involve a crucible.

Crucibles are traditionally used to melt the alloy and the collect it in the molten state. With the use of tongs the crucible is carried to the mold and poured. The ladle takes the place of the crucible in this regard. The metal caster pours the molten alloy which is in the ladle into the mold. The most common metal casting process is Sand casting which lends itself well with cupola furnaces.

Cupola furnaces can either be purchased or constructed. Many hobby metal casters prefer to construct their own cupolas finding it difficult to find a furnace to fit their size requirements or their budget. Cupolas have been made from coffee cans large pipes and really just matters on what materials the caster is able to procure. By making your own furnace you will be able to customize it. Many will need a furnace to be small and portable. No one wants to leave a furnace out in the rain, after all. The chances are pretty good that if you are into metal casting then you have some of the technical knowledge needed to make your own cupola furnace. If not, then it is worth a shot just be extremely careful. You may want to find someone in your community that can aid you in your endeavor.

Backyard Metal Casting

Kent Klein asked:


The Do It Yourself movement is certainly not a new one. The term, DIY was popularized in the 1950s but the concept has been around for ages. The concept behind DIY is undertaking a variety of projects either home improvement, restoration, or arts and craft without the help of paid professionals.

Recently the DIY movement has received a boost of popularity with the aid of the internet. Many are finding that DIY projects are easier to undertake with the help of instructional websites which provide step by step instructions and real advice from people who have actually accomplished the DIY process. Several of these sites provide ideas, photos, message boards, and a sense of community for Do It Yourselfers that was simply not available years ago.

DIY projects can include any number or projects and ideas. Certainly the most common projects include home improvement such as cabinetry or installing plumbing fixtures, but one of the oldest DIY projects has to be metal casting.

The DIY casting movement has been around ever since metal casting itself has been around, which is quite some time. Metal casting is the act of taking molten metal and shaping it with the use of molds into something new. Metal casting has been used in the ancient world for the use of making weapons, jewelry, and even religious icons. Today, DIY metal casting is used to create parts and items for use in a variety of hobbies and restoration projects. This includes home improvement items as well. Metal casting can be used to make door knobs, cabinet handles, and other such items. For hobbyists, small model parts and miniatures can be created. Even artists use metal casting for sculptures and jewelry creation.

Metal casting possesses the true spirit of Do It Yourself. Many metal casters are drawn to the skill because it provides a cheap alternative to purchasing items or having commercial foundries make custom items. Nearly everything used in metal casting can be made by the caster. The furnace, molds, tools, and many others are made by most casters.

Like other DIY projects, the DIY casting movement is being helped along my communities that are found online. These communities act as meeting grounds for casters to share and exchange knowledge and ideas, not to mention blueprints for furnaces and ingredients for casting materials.

Metal casting is the pinnacle of DIY projects as it involves the fabrication of items from metal. After creating a mold of the desired item the caster will melt down iron, brass, or aluminum in a furnace. The molten alloy is poured into the mold and allowed to cool. The cast is removed to reveal a copy of the original pattern. There are several casting methods so undertaking a DIY casting project can be very involved and addicting.

In the spirit of DIY, metal casters strive to make the best for the least. A great source for aluminum is soda cans and many casters gladly travel to scrap yards for iron or brass.

The DIY casting movement is really gaining steam as many realize how cheap and fun this alternative is.

Metal Casting Blog

Kent Klein asked:


The Do It Yourself movement is certainly not a new one. The term, DIY was popularized in the 1950s but the concept has been around for ages. The concept behind DIY is undertaking a variety of projects either home improvement, restoration, or arts and craft without the help of paid professionals.

Recently the DIY movement has received a boost of popularity with the aid of the internet. Many are finding that DIY projects are easier to undertake with the help of instructional websites which provide step by step instructions and real advice from people who have actually accomplished the DIY process. Several of these sites provide ideas, photos, message boards, and a sense of community for Do It Yourselfers that was simply not available years ago.

DIY projects can include any number or projects and ideas. Certainly the most common projects include home improvement such as cabinetry or installing plumbing fixtures, but one of the oldest DIY projects has to be metal casting.

The DIY casting movement has been around ever since metal casting itself has been around, which is quite some time. Metal casting is the act of taking molten metal and shaping it with the use of molds into something new. Metal casting has been used in the ancient world for the use of making weapons, jewelry, and even religious icons. Today, DIY metal casting is used to create parts and items for use in a variety of hobbies and restoration projects. This includes home improvement items as well. Metal casting can be used to make door knobs, cabinet handles, and other such items. For hobbyists, small model parts and miniatures can be created. Even artists use metal casting for sculptures and jewelry creation.

Metal casting possesses the true spirit of Do It Yourself. Many metal casters are drawn to the skill because it provides a cheap alternative to purchasing items or having commercial foundries make custom items. Nearly everything used in metal casting can be made by the caster. The furnace, molds, tools, and many others are made by most casters.

Like other DIY projects, the DIY casting movement is being helped along my communities that are found online. These communities act as meeting grounds for casters to share and exchange knowledge and ideas, not to mention blueprints for furnaces and ingredients for casting materials.

Metal casting is the pinnacle of DIY projects as it involves the fabrication of items from metal. After creating a mold of the desired item the caster will melt down iron, brass, or aluminum in a furnace. The molten alloy is poured into the mold and allowed to cool. The cast is removed to reveal a copy of the original pattern. There are several casting methods so undertaking a DIY casting project can be very involved and addicting.

In the spirit of DIY, metal casters strive to make the best for the least. A great source for aluminum is soda cans and many casters gladly travel to scrap yards for iron or brass.

The DIY casting movement is really gaining steam as many realize how cheap and fun this alternative is.

Metal Casting Basics

Kent Klein asked:


Lost Wax Casting is known as Cire Perdue in French. It is a process in which an artist’s sculpture is used to cast bronze. The Lost Wax Casting method is also known as Investment Casting in the modern industrial world. This is a very ancient method used for casting small bronze sculptures, but today it is used to make many different artifacts and the process varies from foundry to foundry. Today this developed method of Lost Wax Casting is used to make articles like fine jewelery, show pieces, dental restoration, a few specific industrial parts and also some machine tools.

Process of Lost Wax Casting:

Rough Sculptor making: A creative artist makes an original sculptor or mold or an artwork by using raw material like wax, plaster of Paris or clay. A mixture of oil based clay and wax is preferred as these materials retain their softness.

Final Mold Making: A mold is then made as per the original sculptor. The mold is made up of two pieces and a key with shim is placed between the two pieces during construction so the mold can be put accurately back together. Molds are generally made using plaster or fiberglass or any other material that may be suitable. An inner mold of latex or vinyl or silicone is put pup preserve the details of the original art work. Generally, the original art work made of plaster mold cracks and breaks during the initial phase of deconstruction. Many a times, numerable molds are required to get the exact replica of the original art work.

Filling up the mold: Once the latex and plaster mold is complete and finished, molten wax is poured into the mold till it gets an even coating all around the mold. The thickness of the wax coating is around 1/8 inch. This process is then repeated until the desired thickness is achieved.

Removal of wax replica: The hollow wax replica of the original art work is then removed from the mold. The original mold can be used for making more wax replicas, but due to the wear and tear of the original mold the reuse of the mold is limited.

Softening: Each wax mold is then chased or softened using heated metal tools. The metal tools are rubbed around portions that show cracks or the joining line of the mold, where the pieces have come together. Separately molded wax pieces are then heated and attached. The finished mold is then dressed in order to hide any imperfections. The final piece then looks like a bronze sculpture.

Making paths for molten bronze: It is also known as “spuring”, in short the wax copy is then branched with treelike wax, so that the molten bronze reaches the right parts and also it helps the air to escape. The critical and careful spuring begins from the top of the wax copy. The top of the copy is attached to by wax cylinders to different points on the wax copy.

Slurry, burnout, testing, pouring, release, metal-chasing, and painting are the final steps in the process of Lost Wax Casting.

Metal Casting

Kent Klein asked:


The most noticeable item in any backyard foundry is the furnace. This is no surprise really, because without the furnace the entire metal casting operation would be nonexistent. The furnace can take really any size and form depending upon the need and budget of the metal caster. What really makes home metal casting furnaces really unique is how many of them come into creation.

Sure there are plenty of companies that will gladly sell furnaces for the hobby metal caster and while this can be a viable solution to your furnace needs many metal casters prefer another method.

Making your own furnace is not as far fetched as it may seem and if you already a Do It Yourselfer, chances are you will have the needed skills and tools in your workshop or garage already. There are a variety of reasons why people make their own furnaces. The most common reason is fulfilling a need.

Many hobbyist and metal workers find out, to their dismay, that the local commercial foundries can not make the needed part or if they do, they feel the need to charge an outrageous sum. Not to mention the fact that the traditional methods of metal casting is quickly becoming forgotten as the industry turns to electric furnaces. So many hobbyists find that constructing their own furnace is an absolute necessity and a great way to preserve a piece of craftsman history. The artisans who use metal casting to create sculptures and other pieces find that making their own furnace grants them a greater amount of control over the entire process. This is actually how many people get into metal casting to begin with.

Most likely, your first furnace is going to be a small and rather simple one. There is really no need to run before you can walk when it comes to something that will be using intense heat and melting iron which can be rather dangerous.

Home made furnaces have been constructed from coffee cans to trash cans or sheet metal welded together. While there are a few components that really should be bought like the retractor to line the furnace walls which should be resistant to high temperature for a prolonged period of time along with special connectors and regulators, most of the furnace can be created in your own home. You should be able to find most of the components that you can not make at hardware stores or plumbing supply stores for relatively cheap.

Along with the furnace parts you will also need to buy a crucible which will hold the metal as it melts along with the appropriate tools that you will use to handle the crucible. While you are at it you might as well buy all the safety equipment like gloves, protective eye wear, and leather shoes. There is other safety equipment that you will need depending on the type of work and the type of furnace you are going to make.

Most likely, your first furnace is going to be a simple cupola variation. The cupola furnace which is going to resemble a smoke stack is a simple design and is relatively easy to make for anyone with mild craft skill. This type of furnace will not require a crucible since you will be able to pour the molten metal from the furnace itself into a ladle that can then be poured into the mold.

DIY casting furnaces are a great way to connect yourself with your metal casting work giving you more control. While building the furnace can be complicated at first, once you delve into it you will find the experience enjoyable and fascinating.

Back Yard Metal Casting

Kent Klein asked:


Many believe that iron casting is just simply out of reach for small furnaces but this is not the case. While alloys like aluminum are more prevalent in home foundries. Artists and hobbyists have also used brass, bronze, and even iron to fulfill their casting needs.

Industrial foundries commonly use iron for a variety of items like cookware, like cast iron pans, and even bridges. Casting iron provides an easy and effective method of making such large structural pieces and even smaller pieces for around the home.

The most common furnace type used by home foundries is the cupola furnace. The cupola is a basic furnace type that does not need a crucible as it allows the caster to pour the molten metal directly from the furnace into a ladle which is then poured into the mold. Cupola furnaces resemble smoke stacks and can be home made for those with enough confidence and some mechanical know-how to attempt it. The fuels used to heat the metal in a cupola furnace depend on the caster’s resources and preference. Many will use propane and some will use coal. There are a select few that will use waste material such as old scraps of metal and the powder at the bottom of bags of barbecue coal to fuel the cupola. For iron many would recommend the use of propane, but there have been some casters that have succeeded with waste material. Don’t be afraid to experiment with different fuel types to find the perfect fit for your furnace and need.

Finding a source of iron can be difficult and a trip to the scrap yard might be in order. This is just one of the exciting ventures that metal casting can provide you. After you locate your iron you will need to prepare your mold. This is assuming you have a pattern in mind that you want to cast. If not, then go ahead and figure something out even if it’s a small piece in order to test your iron casting ability. Since sand casting is the most popular casting method you might want to use it for the iron casting especially if you are familiar with the method and not with iron.

After making the sand mold and placing the runner for the molten iron you will melt the metal. The melting point of iron is 2,800 degrees Fahrenheit or about 1538 degree Celsius. Since all metals melt at different temperatures don’t be impatient if iron takes longer to melt and don’t be surprised if it’s quicker.

When the molten iron is ready you are going to pour some into a ladle and the pour that into the sand mold. The sand mold is held in place by the cope and drag, which is the top and bottom part of the mold. The runners are in place in the mold to allow the molten iron a place to enter. When the iron is cool, remove the cast from the sand carefully and there you have a cast of iron.

As with all metal casts, you will need to follow the appropriate safety steps to avoid any accidents. Accidents with molten metal will always be very painful so make sure you wear gloves, jeans, boots, and a long sleeve shirt. You may also want a heavy duty leather apron and a pair of goggles.

Iron casting is a great way to create restoration items or pieces for around the home and even for artistic purposes.

Bronze Metal Casting