Metal Casting Zone Info Blog

Posts Tagged ‘Ductile’

Spring City’s Ductile Iron Lampposts

Ductile iron, also called ductile cast iron or nodular cast iron, is a kind of cast iron invented in 1942. Ductile iron is composed of spherical graphite instead of flakes which is visible in grey iron and is made by treating molten iron with magnesium. While most varieties of cast iron are brittle, ductile iron is much more ductile.

This is attained through multifaceted metallurgy and foundry process control. Ductile Iron has been successful as it offers a blend of versatility and properties not available in any of its rivals. Its cast ability, mach inability, dampening properties, and economy of production are almost equal to those for which Gray Iron is famous, but its mechanical properties – strength, wear resistance, fatigue strength, toughness and ductility are competitive with many casts, forged and fabricated steel components.

The American Association of State Highway and Transportation Officials (AASHTO) are the nationally recognized standards organization for the analysis of lighting structures. They allow the bending strength of ductile iron to be 3 to 4 times that of cast aluminum and grey iron.

Spring City is self-assured that their ductile iron lamppost will last the lifetime of our project. Their ductile iron products are practically durable and have been known to endure some of the most extreme moments in American history. If we choose to buy Spring City’s ductile iron lamppost for steel shafts, we will be investing our money in a value product that will look new for many years to come! This wide-ranging warranty covers the products to be free from defects in material and workmanship under normal use and operation for twenty-five years.

The Benefits of Choosing a Ductile Iron Lamppost

• 25 Year Warranty Available

• Quickly replacing cast steel in structural applications

• Stronger than cast iron and cast aluminum

• High impact strength

• Does not become brittle unlike aluminum

• Excellent dampening qualities – Perfect for bridge applications

• Service life is 3 times as long as that of cast aluminum

Ductile Iron Application

The scope of ductile iron application can be divided into four fields: First, pressure pipes and fittings. Second, the automobile industry. Third, agriculture, road and construction applications. Fourth, general engineering.

1. Pressure pipes and fittings

Ductile iron pipe has been used to transport water and other liquids, which testifies to the ball better than gray cast iron pipe. Because cast iron has excellent strength and toughness. These physical characteristics make the pipeline withstand the high operating pressure, and can withstand the excavation near pipelines and municipal construction and transportation requirements.

2. Automotive applications

The automotive industry is the second largest ductile iron casting application fields. Ductile iron has been used in cars in the three main areas: first, the car engine parts, second, gears and bushings, third, suspension, brakes and steering. Almost all crankshafts of the Ford Motor Company have been manufactured by ductile iron. Most of the worldwide cars are fitted with ductile iron crankshaft, instead of forged steel crankshaft.

3. Agriculture, road and construction applications

Modern agriculture requires a reliable and long service life of agricultural machinery. The entire agricultural industry are widely using ductile iron castings including tractor parts, plows, brackets, clamps and pulleys. For other types of agricultural machinery including bulldozers, moved into machines, cranes and compressors, ductile iron castings in these areas have a very wide range of applications.

4. General engineering applications

The machine tool industry is using the excellent engineering performance of the ductile iron to design complex machine parts. Ductile iron has high tensile strength and yield strength, and good mechanical processing properties, thus allowing production of lighter castings to keep a good rigidity. Similarly, the strength and toughness of ductile iron has made it to be widely used in all kinds of hand tools such as wrenches, clamps and gauges etc.

Paper manufacturing industry is using the high strength and high elastic modulus of ductile iron. These properties can reduce the weight of the pressure drum and drying drum.

Therefore, ductile iron castings have been widely used in many industrial areas worldwide. With the continuous development of metal founding, the application of ductile iron must be wider in the future.

This article was from Dandong Foundry Blog.

Do you ever mind how ductile pipes are made which we often see them in underground drainage’s. Watch this video.
Video Rating: 5 / 5

Related Ductile Iron Castings Articles

Ductile iron pipe

Dimensions

Ductile iron pipe is sized according to a dimensionless term known as the Pipe Size or Nominal Diameter (known by its French abbreviation, DN). This is roughly equivalent to the pipe’s internal diameter in inches or millimeters. However, it is the external diameter of the pipe that is kept constant between changes in wall thickness, in order to maintain compatibility in joints and fittings, and consequently the internal diameter does vary, sometimes significantly, from its nominal size. Nominal pipe sizes vary from 3 inches up to 64 inches, in increments of at least 1 inch, in the USA.

Pipe dimensions are standardised to the mutually incompatible AWWA C151 (U.S. Customary Units) in the USA, ISO 2531 / EN 545/598 (metric) in Europe, and AS/NZS 2280 (metric) in Australia and New Zealand. Although both metric, European and Australian are not compatible and pipes of identical nominal diameters have quite different dimensions.

North America

Pipe dimensions according to the American AWWA C-151

Pipe Size

Outside Diameter (in)

3

3.96

4

4.80

6

6.90

8

9.05

10

11.10

12

13.20

14

15.30

16

17.40

18

19.50

20

21.60

24

25.80

30

32.00

Europe

European pipe is standardized to ISO 2531 and its descendent specifications EN 545 (potable water) and EN 598 (sewage). European pipes are sized to approximately match the internal diameter of the pipe, following internal lining, to the nominal diameter. ISO 2531 maintains dimensional compatibility with older German cast iron pipes. Older British pipes, however, which used the incompatible imperial standard, BS 78, require adapter pieces when connecting to newly installed pipe. Coincidentally, the British harmonization with European pipe standards occurred at approximately the same time as its transition to ductile iron, so almost all cast iron pipe is imperial, and all ductile pipe, metric.

DN

Outside Diameter (mm)

Wall thickness (mm)

Class 40

K9

K10

40

56

4.8

6.0

6.0

50

66

4.8

6.0

6.0

60

77

4.8

6.0

6.0

65

82

4.8

6.0

6.0

80

98

4.8

6.0

6.0

100

118

4.8

6.0

6.0

125

144

4.8

6.0

6.0

150

170

5.0

6.0

6.5

200

222

5.4

6.3

7.0

250

274

5.8

6.8

7.5

300

326

6.2

7.2

8.0

350

378

7.0

7.7

8.5

400

429

7.8

8.1

9.0

450

480

-

8.6

9.5

500

532

-

9.0

10.0

600

635

-

9.9

11.0

700

738

-

10.8

12.0

800

842

-

11.7

13.0

900

945

-

12.6

14.0

1000

1048

-

13.5

15.0

1100

1152

-

14.4

16.0

1200

1255

-

15.3

17.0

1400

1462

-

17.1

19.0

1500

1565

-

18.0

20.0

1600

1668

-

18.9

21.0

1800

1875

-

20.7

23.0

2000

2082

-

22.5

25.0

Australia

Australian and New Zealand pipes are sized to an independent specification, AS/NZS 2280, that while adopting the nomenclature of European standards, is not compatible. Australia adopted at an early point the imperial British cast iron pipe standard BS 78, and when this was retired on British adoption of ISO 2531, rather than similarly harmonizing with Europe, Australia opted for a ‘soft’ conversion from imperial units to metric, published as AS/NSZ 2280, with the physical outer diameters remaining unchanged, allowing continuity of manufacture and backwards compatibility. A result is that the inner diameters of lined pipe differ widely from the nominal diameter and hydraulic calculations do require some knowledge of the pipe standard.

Nominal Size (DN)

Outside Diameter (mm)

Nominal Wall Thickness (mm)

PN 20

PN 35

Flange Class

100

122

-

5.0

7.0

150

177

-

5.0

8.0

200

232

-

5.0

8.0

225

259

5.0

5.2

9.0

250

286

5.0

5.6

9.0

300

345

5.0

6.3

10.0

375

426

5.1

7.3

10.0

450

507

5.6

8.3

11.0

500

560

6.0

9.0

12.0

600

667

6.8

10.3

13.0

750

826

7.9

12.2

15.0

Joints

Individual lengths of ductile iron pipe are joined either by flanges, couplings, or some form of spigot and socket arrangement.

Flanges

Flanges are flat rings around the end of pipes, which mate with an equivalent flange from another pipe, the two being held together by bolts usually passed through holes drilled through the flanges. A deformable gasket, usually elastomeric, placed between raised faces on the mating flanges provides the seal. Flanges are designed to a large number of specifications that differ due to dimensional variations in pipes sizes, and pressure requirements, but also due to independent standards development. In the U.S. flanges are ‘threaded’ and can be ‘welded’ onto the pipe. In the European market flanges are often welded on to the pipe. Flanges are available in a standard 125 lb. bolt pattern as well as a 250 lb. bolt pattern (steel bolt pattern). Both are usually rated at 250 PSI. A flanged joint is rigid and can bear both tension and compression as well as a limited degree of shear and bending. It is also dismantlable once constructed. Flanged joints cannot, however, be reliably used for buried pipe due to the possibility of soil movement placing very large bending loads on the joint.

Current flange standards used in the water industry are ANSI B16.1 in the USA, EN 1092 in Europe, and AS/NZS 4087 in Australia and New Zealand.

Spigot and Socket

Spigot and sockets involve a normal pipe end, the spigot, being inserted into the socket or ‘bell’ of another pipe or fitting with a seal being made between the two within the socket. Normal spigot and socket joints do not allow direct metal to metal contact with all forces being transmitted through the elastomeric seal. They can consequently flex and allow some degree of rotation, allowing pipes to shift and relieve stresses imposed by soil movement. The corollary is that unrestrained spigot and socket joints transmit essentially no compression or tension along the axis of the pipe and little shear. Any bends, tees or valves therefore require either a restrained joint or, more commonly, thrust blocks, which transmit the forces as compression into the surrounding soil.

A large number of different socket and seals exist. The most modern is the ‘push-joint’ or ‘slip-joint’, whereby the socket and rubber seal is designed to allow the pipe spigot to be, after lubrication, simply pushed into the socket. Push joints remain proprietary designs. The most common are the Tyton joint, developed by U.S. Pipe, the Fastite, by the American Cast Iron Pipe Co., and the Rapid, by Saint-Gobain PAM, which is marketed outside the U.S. Restrained joint systems are available too. Each of the four U.S. manufacturers has their own proprietary restrained joint system that generally involves a “boltless system”. Clow Water Systems has the Super-Lock joint, Pacific States Cast Iron Pipe Co. has the Thrust-Lock system, Griffin Pipe Products has the Snap-Lock joint, U.S. Pipe has the TR-Flex joint, and American Cast Iron Pipe has the Flex-Ring joint. Also available are locking gasket systems. Available for the standard ‘push-joint’ systems are the Sure Stop gasket by McWane, Field Lok by U.S. Pipe, and Fast Grip by American Cast Iron Pipe Co. These locking gasket systems work on the “Chinese Box” principle where you can push the pipe together, but will be unable to pull it apart (without using a special tool or blow torch on the gasket).

Manufacture

Ductile iron pipe is produced by a technique known as centrifugal casting, originally developed by Dimitr Sensaud deLavaud for cast iron pipe in 1918. The molten ductile iron is poured into a rapidly spinning water-cooled mold. Centrifugal force results in an even spread of iron around the circumference.

Internal Coatings

Ductile iron pipe is somewhat resistant to internal corrosion in potable water and less aggressive forms of sewage. However, even where pipe material loss and consequently pipe wall reduction is slow, the deposition of corrosion products on the internal pipe wall can dramatically reduce the effective internal diameter and effectively choke flow, increasing pumping costs and lowering system pressure, long before the pipe itself is at risk of failure. A variety of linings are available to reduce or eliminate corrosion, including cement mortar, polyurethane and polyethylene. Of these, cement mortar lining is by far the most common.

Cement Mortar Linings

The predominant form of lining for water applications is cement mortar centrifugallly applied during manufacturing. The cement mortar comprises a mixture of cement and sand to a ratio of between 1:2 and 1:3.5. For potable water, portland cement is used, for sewage it is common to use sulfate resisting or high alumina cement.

Cement mortar linings have been found to dramatically reduce internal corrosion. A DIPRA survey has demonstrated that the Hazen-Williams factor of cement lining remains between 130 and 151 with only slight reduction with age.

External Coatings

Unprotected ductile iron, similarly to cast iron, is intrinsically resistant to corrosion in most, although not all, soils. Nonetheless, due to frequent lack of information on soil aggressiveness, and to extend the installed life of buried pipe, ductile iron pipe is commonly protected by one or more external coatings. In the U.S. and Australia, loose polyethylene sleeving is preferred. In Europe, standards recommend a more sophisticated system of directly bonded zinc coatings overlaid by a finishing layer be used in conjunction with polyethylene sleeving.

Polyethylene Sleevings

Polyethylene sleeving was first developed by CIPRA (since 1979, DIPRA) in the U.S. in 1951 for use in highly corrosive soil in Birmingham, Alabama. It was employed more widely in the U.S. in the late 1950s and first employed in the U.K. in 1965 and Australia in the mid 1960′s.

Polyethylene sleeving comprises a loose sleeve of polyethylene sheet that completely wraps the pipe, including the bells of any joints. Sleeving inhibits corrosion by a number of mechanisms. It physically separates the pipe from soil particles, preventing direct galvanic corrosion. By providing an impermeable barrier to ground water, the sleeve also inhibits the diffusion of oxygen to the ductile iron surface and limits the availability of electrolytes that would accelerate corrosion. It provides a homogeneous environment along the pipe surface so that corrosion occurs evenly over the pipe. Finally, the sleeve restricts the availability of nutrients which could support sulfate-reducing bacteria, inhibiting microbially-induced corrosion. Sleeving is not designed to be completely water-tight but rather to greatly restrict the movement of water to and from the pipe surface. Water present beneath the sleeve and in contact with the pipe surface is rapidly deoxygenated and depleted of nutrients and forms a stable environment in which limited further corrosion occurs. An improperly installed sleeve that continues to allow the free flow of ground water is not effective in inhibiting corrosion.

Polyethylene sleeves are available in a number of materials. The most common contemporary compositions are linear low-density polyethylene film which requires an 8 mil or 200 m thickness and high-density cross-laminated polyethylene film which requires only a 4 mil or 100 m thickness. The latter may or may not be reinforced with a scrim layer.

Polyethylene sleeving does have limitations. In European practice, its use in the absence of additional zinc and epoxy protective coatings is discouraged where natural soil resistivity is below 750 ohm/cm, where resistivity is below 1500 ohm/cm and the soil is frequently water logged, where there are additional artificial soil contaminants or where there are stray currents. Due to the vulnerability of polyethylene to UV degradation, sleeving, or sleeved pipe should also not be stored in sunlight, although carbon pigments included in the sleeving can provide some limited protection.

Polyethylene sleeving is standardised according to ISO 8180 internationally, AWWA C105 in the U.S., BS 6076 in the U.K. and AS 3680 and AS 3681 in Australia.

Zinc Coatings

In Europe, ductile iron pipe is typically manufactured with a zinc coating overlaid by an either bituminous or polymer, normally epoxy, finishing layer. EN 545/598 mandates a minimum zinc content of 135 g/m2 (with local minima of 110 g/m2 at 99.99% purity), and a minimum average finishing layer thickness of 70 m (with local minima of 50 m) although some manufacturers, notably Saint-Gobain PAM considerably exceed these thicknesses.

No current AWWA standards are available for bonded coatings (zinc, coal tar epoxy, tape-wrap systems as seen on steel pipe) for ductile iron pipe, DIPRA does not endorse bonded coatings and AWWA M41 generally views them unfavourably, recommending they be used only in conjunction with cathodic protection .

Bituminous Coatings

As noted, zinc coatings are generally not employed in the U.S. and Australia. In order to protect ductile iron pipe prior to installation, pipe is instead supplied with a temporary 1 mil or 25 m thick bituminous coating. This coating is not intended to provide protection once the pipe is installed.

Producers

U.S.

In the United States ductile iron pipe is manufactured by McWane Inc.(consisting of four foundries – McWane Cast Iron Pipe Co., Clow Water Systems Company,Atlantic States Cast Iron Pipe Co. & Pacific States Cast Iron Pipe Co.), Griffin Pipe Products, U.S. Pipe & Foundry, and American Cast Iron Pipe Co. The primary headquarters for three of these four companies are based in Birmingham, AL.

Europe

Saint-Gobain PAM, a subsidiary of Saint-Gobain and the world’s largest ductile iron pipe manufacturer, is predominant in Europe. Saint-Gobain PAM formed in 1970 following the merger of Saint-Gobain and the company Pont–Mousson (PAM). Saint-Gobain PAM’s ductile iron pipe factory in the town of Pont–Mousson remains the world’s largest.

Australia

In Australia, Tyco Flow Control Pacific, a subsidiary of Tyco International, is by a wide margin the largest Australian manufacturer of DICL, after having purchased Tubemakers Water and its single Yennora Manufacturing Facility in Sydney’s west, from BHP in 1999.

Industry Associations

In the United States ductile iron pipe is often promoted to municipalities and consulting engineers by DIPRA, which is the Ductile Iron Pipe Research Association. Their focus is to promote the benefits of using ductile iron pipe on utility projects (water & sewer) over alternate products like PVC, PCCP, and HDPE.

Environmental

Ductile iron pipe in the developed world is normally manufactured exclusively from scrap steel. Ductile iron pipe itself can be recycled. In the U.S. with the growing ‘Green’ movement ductile iron pipe is in a natural position to regain market share lost to its largest competitor, the PVC industry, over the past 40 years. PVC pipe has negative environmental issues ranging from carcinogens produced at resin plants to the burning of it releasing dioxins into the atmosphere to its carbon footprint.

Colloquialisms

As a commonly used construction material ductile iron pipe has assumed various colloquial shortened names. In America it is commonly referred to as ‘ductile’, in the UK, by the initials, ‘DI’, and in Australia as the acronym, DICL (Ductile Iron – Cement Lined), pronounced ‘dickle’.

Notes

^ a b c Moser, A. P. and Folkman, Steven L. (2008) Buried Pipe Design (3rd edition) McGraw-Hill, New York, p. 336-337, ISBN 978-0-07-147689-8

^ a b IGN 4-50-03 – Operating Guidelines for the Use of Site-Applied, Factory Applied and Reinforced Factory Applied Polyethylene Sleeving on Ductile Iron Pipeline Systems
^ AWWA Manual M41 – Ductile-Iron Pipe and Fittings

External links

Official Web Site of Clow Water Systems Co.

Official Web Site of the Ductile Iron Pipe Research Association

Official Web Site of McWane Inc.

The history ductile iron manufacture in Australia

WSAA assessment of Saint-Gobain PAM pipe

Categories: Piping | Water industryHidden categories: Articles lacking sources from July 2008 | All articles lacking sources

Our K-9s are guaranteed to tell you if your imported cast iron meets the standard. www.roscosdogs.com
Video Rating: 0 / 5

Ductile iron in China

Ductile iron is also known as nodular cast iron, spheroidal graphite iron, spherulitic iron.

Ductile iron is a kind of spherical graphite cast iron. The globalization and inoculation processes effectively improved the mechanical properties, particularly increased plasticity and toughness, which is higher than the strength of carbon steel.

Ductile iron is a kind of malleable iron. Ductile iron in the graphite shape was spherical. As the spherical graphite metal matrix separated the role of smaller, so it has high strength, ductility and toughness, so a wider application, in some cases can replace the carbon steel. Ductile iron is widely used in construction tools, equipment manufacturing, such as flat-panel buttons, butterfly buckle, wall nuts, washers and other fields.

Carbon steel has less than 0.3% carbon content, while the cast iron and ductile iron with carbon content the amount of at least 3%. The low-carbon steel makes the existence of carbon as free graphite sheet structure will not form. Cast iron in the natural form of carbon free form of graphite sheets. During inoculation period, the graphite sheet change through special processing methods into a tiny ball. This improvement made after the ball made of cast iron ductile iron and steel than the more superior compared to the physical properties.

Ductile Iron Grade:
ASTM A536 – 60-40-18, 65-45-12, 70-50-05;
DIN 1693 – GGG40, GGG50; DIN EN 1563 – EN-GJS-350, EN-GJS-400-15, EN-GJS-450-10, EN-GJS-500-7;
ISO 1083 – 400-15, 400-18, 450-10, 500-7;
JIS G5502 – FCD400-15, FCD400-18, FCD450-10, FCD500-7;
BS 2789 – 400/18, 420/12, 450/10, 500/7.

For more information about ductile iron products, please check Dandong Foundry’s Blog.

For more information about our company, please check Dandong Foundry

This is the Sandvik Coromant CoroMill 490 three inch facemill with ten inserts rough milling a nodular cast iron part on a Mazak
Video Rating: 5 / 5

Related Nodular Cast Iron Articles