Metal Casting Zone Info Blog

Posts Tagged ‘floor’

• Note: This item is subject to a $30
• 00 oversized shipping surcharge
• This item cannot be shipped 2nd-Day Air
• Value and efficiency in a double-pumper jack, the Model 3003 will get the load in the air faster and safer
• With AFF’s double-pumper technology and safety overload system, it’s the type of workhorse jack DIYs and weekend mechanics want

Product Description
Note: This item is subject to a $30.00 oversized shipping surcharge. This item cannot be shipped 2nd-Day Air. Value and efficiency in a double-pumper jack, the Model 3003 will get the load in the air faster and safer. With AFF’s double-pumper technology and safety overload system, it’s the type of workhorse jack DIYs and weekend mechanics want. Two-piece 50 1/4″ handle for easy maneuverability and storage Optional cross-beam adapter (Model 3167) provides entire front or rear end vehicle lift for greater stability Optional trasmission adaptor (model 3165) for removal/installation of transmissions

Viking 3 Ton Double Pumper Floor Jack

• Uses 150 watt 3 way light bulb
• Silk Shade
• Metal Cast Floor Lamp

Product Description
150W 3 way metal casting floor lamp w/silk shade

Metal Casting Floor Lamp W/silk Shade

Ground floor concrete slabs are laid on natural ground levels. This are are normally cast after completion of the foundation works. There is a difference between them and basement floors. Basements are done below ground level and they are formed above. They can be used in houses, garden sheds and outdoor houses. When casting them the level should be reduced by about two hundred millimeters. This ensures the top vegetable soil is excavated and removed.

Ground floor concrete slabs are solid and not suspended like storeys above this level. Preparation starts after the foundations and walls are finished. The sides of the walls are the back filled internally and externally. After this, the ground is leveled and compacted to receive the hardcore base. This hardcore is average three hundred millimeters in depth. Proper compaction and consolidation is done. This is the base for concrete that is formed.

After the ground floor slab hardcore is compacted and leveled, blinding is then put. The blinding can be of quarry dust, lose chipping, sand or murram. Anti termite treatment is then sprayed on this surfaces. Formwork for the concrete is then fixed to edges of the foundation wall. This is the concrete thickness. The thickness of concrete is one hounded to one hundred and fifty milliners. The height from stripped level is three hundred millimeters.

On ground floor concrete, damp proof membranes are laid after blinding. A sheet of one thousand gauge diothene sheet is used for this. Next mesh reinforcement is laid above the sheet. After this concrete is mixed and poured on top. Leveling is done with the formwork height. Mixes for concrete are one part cement, two parts sand and four parts ballast. After casting the concrete is watered for atleast seven days for curing. Walling can then proceed.