Metal Casting Zone Info Blog

Kent Kelin asked:


Metal Casting is more than just an excuse to play with molten metal it is actually a great way to create art and complicated pieces of machinery or other items that would otherwise be nearly impossible to make. Metal Casting is really a great way to save money…while playing with molten metal. The reason that Metal Casting has survived the test of time is a matter or efficiency. Some of the earliest casting examples have been found in China dating back thousands and thousands of years. In fact every major civilization from the Egyptians to the Romans practiced metal casting. This skill came back into vogue during the Renaissance and has continued to advance and evolve from there. While Sand Casting is the most popular casting process there are many, many more processes available to the backyard foundries. Not everyone is going to be casting heavy pieces like engine parts or cast their own motorcycles. So for those that just want to make decorative pieces you will not be using the same casting process as these heavy duty casters.  For artists creating small scale statues or embellishes and for hobbyists that need a decorative touch to their model plane or boat might want to consider using gravity casting for their needs. Gravity casting seems to be especially useful when dealing with aluminum and other light alloys. The basic idea behind this casting process is pretty much exactly what the name suggests. The metal is introduced into the mold by the force of gravity. Most other casting process either use natural pressure difference like the kind in certain sand casting procedures or they use forced pressure like in centrifugal casting to get the molten metal into the mold.  One of the most common uses for gravity casting is when permanent molds are going to be used. Also called a die, the permanent mold is really only economical for those planning on using the same mold numerous times and will need to keep the quality at a constant level. While some temporary molds can be repeatedly used the quality of the finished product will begin to suffer over time. With die molds the quality will remain the same. Die molds should be seen as an investment. Yes, they will be more costly then other molds; however they will outlast cheaper options for molds. With Permanent molds, they are created using cast iron, steel, and other metals. Gravity casting is used for the permanent mold process with pleasing results. Gravity casting is usually used when the finished product is more visually based then structurally based which is why this method is a favorite of artists and even some jewelers. The loss of strength is due to the lack of pressure used in this process. For those that need the strength but still want to use gravity casting, more of the molten metal will need to be used which will increase the weight. Relying on gravity will take patience, although it will be needed for larger products. If you have never tried gravity casting then you should, because you just may be surprised by what such a simple thing like gravity can create. For the sake of humor, make an apple and see what happens.

Home Metal Casting

Kent Kelin asked:


A Cupola is a type of furnace that is very much alike to blast furnace. The Cupola furnace is refractory lined, stack of steel that is around 20 to 35 feet high. It rests on a base plate that is made of cast iron and has four legs. The casting that is obtained from the cupola furnace is known as a cupola casting.

Cupola Furnace: The Cupola furnace is one of the oldest forms of furnace that have been used by the iron and metal foundries. The Cupola furnace is the crudest and the simplest furnace that has been used by the industries. However, the cupola’s use is declining and the furnace is fast being extinct.

Merits of the Cupola Furnace: Though the electric or the blast furnace has started replacing the Cupola Furnace, it has some special benefits of its own. The Cupola furnace can always remain continuously in action. The furnace also offers a very high melting rate. The most important merit of the furnace is that it has relatively very low melting cost. The furnace has also permits a lot of ease of operation.

However, due to the invention and development of the electric furnace, the use of Cupola furnaces has substantially declined. The electric furnace melts a much larger amount of metal. The operation cost of the electric furnace is also very low. The electric furnace also emits a much smaller level of smoke heat and also pollutants.

Construction of the Cupola furnace: The Cupola furnace is constructed in a crude and simple manner. The Cupola furnace is a vertical structure like a steel shell. The steel is lined with refractory bricks from the inside. The furnace has an opening half way in the vertical shaft. The charge is introduced through the opening. The charge is divided into different layers. It contains the metal that is to be melted. The metal is mixed with coke, fuel, and lime stone flux. The fuel is burnt directly into the air and is introduced in to the furnace through the tuyeres which are positioned above the hearth. The hot gases that have been produced ascend and pre heat the charge.

The cupolas in majority of the cases have drop down doors. The bottoms can be dropped down to facilitate the cleaning and the repairs. At bottom in front of the furnace is a tap hole. The molten metal is removed from the tap hole. At the rear there is also another slag hole. The top of the stag is covered with a spark or fume arrester.

Usually the cupola has a diameter of 405 to 2000 mm. It is operated on varying fuels for different metal ratios. The molten metal that can be produced in the copula of this size at a speed of 1 to 30 tones per hour.

Continuity of process: After the process of melting has ended, the charging is halted. However, the blast of hot air is always maintained till all the metal has been melted and has been taken out from the tap hole. When the air cools down, the doors at the bottom are opened and the residue that has been left behind is removed

DIY Metal Casting

Kent Kelin asked:


There are various types of casting tools. Provided below are details of some of the casting tools.

Esmarch plaster scissors: These are German stainless steel cast scissors of high quality. The entire length is 20 centimeters or 8 inches. There is a 6 centimeters slanted blade for safety of the patient. The handle for leverage is of 15 centimeters. This is perfect to cut the inner layers of synthetic cast materials or plaster.

Lister bandage scissors: These are stainless steel bandage scissors of high quality. The size of the blade is 5.5 centimeters. It resists rust and corrosion. This scissors are perfect to remove QuickCast splints and casts.

Cast scissors for serial finger casts: These are manufactured from German stainless steel of highest quality. The total length is 9 centimeters. There is a 1.3 centimeters slant design on the cutting surface. During cast removal, there is good patient safety and the scissors offer excellent force.

Cast spreader: This has a stainless steel construction. There is a spring loaded handle to facilitate use.

Cast breaker: The length of the cast breaker is seven inches. This is an O.R. quality German instrument. This is used for lightweight cast breaking and trimming. This has deep serrated tips and is free of latex. The cast breaker is available in sizes of 9.5 inches also.

Plaster and Utility shears: The length of this instrument is 8 inches. This is a German instrument of O.R. quality. There is a spring loaded handle design that decreases the hand fatigue. This is very efficient in case of cotton or cloth wadding. It is free of latex.

Wire suture scissors: This is a stainless steel scissors of high quality. This is a perfect device to remove finger serial casts and to make tight corner cuts.

Fiskars all purpose snips: This instrument has a positive safety latch, a stainless steel spring and a comfort grip. The design is such that there is maximum power and handling ease. The stainless steel blades of high quality are used to cut a wide range of materials. Low temperature thermoplastics can be cut at room temperature by this device.

Aviation snips: These snips are of industry quality. Non-heated splinting material can be cut with efficiency. It can be used to cut straight lines as well as wide curves. The handles are coated with plastic to increase the comfort. This device can be used in the left hand as well as right hand.

Softouch spring action scissors: Those who have weak hands can also operate these by employing half the effort. There is a gray cushion grip. This is used to provide relief to the finger and thumb discomfort. It also absorbs squeezing pressure. The handle can be easily gripped and used in the left hand or right hand. There is a gentle spring action to open blades at the end of each cut. This offers relief to the hand and joints. There is a large slide lock for single handed operation. This also maintains the blades closed for portability and safe storage. It is free of latex.

Cast stand: The height can be adjusted. This comprises of a drip bucket. While the limb is being casted, it provides support to the arm or leg of the patient.

Aluminum Metal Casting

Kent Kelin asked:


Casting is a process in which liquid material made from heating metals, is poured in a module, to give the liquid a desired shape. Then the liquid is cooled and a solid object in the desired shape and size is obtained. Casting Jewelry is the latest “in-thing” in the fashion markets. This jewelry is made from different materials like silver, aluminum, gold, bronze, alloy metals and even plated casting jewelry is available.

Casting Jewelry is very attractive and delicate. They are made using machines, but very finely crafted and hand made jewelry is also available in the market. This type of jewelry can be available at a very low, as well as high costs, depending on the design and material and design that you choose. Casting Jewelry is very fragile and should be handled with out most care as it can break easily. With the advent of casting jewelry, the fashion world has benefited a great deal. Today, free flowing designs, multicolored jewelry and even a special made to order jewelry is available in the market.

Before this, it was difficult to cast a metal in a desired shape but today it is as simple as it gets, all you need is a creative mind to create new designs and a group of well qualified workers and good machinery to make your own casting jewelry. This also gives you an option to make your own series of new designs. Casting jewelry is being widely used across the globe. With the prices of gold increasing day by day and with the entry of new metal jewelry like platinum, casting jewelry slowly but surely is making a mark in the fashion world. With the cost silver plated casting jewelry, the dream of wearing a new necklace or a new ear-ring everyday is a reality. You can actually afford new set of jewelry everyday. There are also costly models made of pure gold and delicate designs and with embedded diamonds that are available.

Casting Jewelry is not only about fashion, it has also opened a new avenue for small scale businesses. With proper knowledge and machinery, you can start your own company and make casting jewelry. It does not need any expensive material nor does it need a big capital. A small store room in your house will also be sufficient to set up your casting jewelry work-shop. You can then design your own range or hire a professional jewelry designer to create your range of jewelry.

Casting Jewelry has also helped the educational branch of “jewelry designing” grow considerably. Today it is considered in par with “fashion designing”. Many young students are nowadays looking at jewelry designing as a full time career.

The only draw-back of plated casting jewelry is that is they are used on daily basis, then they might lose their shine and the coated silver or gold respectively. If they come in contact with water regularly, then they can turn black. You can get them re-plated and use them. As casting jewelry is very fragile and delicate, even a slight mishap can change its shape or even break it.

Backyard Metal Casting

Kent Kelin asked:


 
The most noticeable item in any backyard foundry is the furnace. This is no surprise really, because without the furnace the entire metal casting operation would be nonexistent. The furnace can take really any size and form depending upon the need and budget of the metal caster. What really makes home metal casting furnaces really unique is how many of them come into creation. Sure there are plenty of companies that will gladly sell furnaces for the hobby metal caster and while this can be a viable solution to your furnace needs many metal casters prefer another method. Making your own furnace is not as far fetched as it may seem and if you already a Do It Yourselfer, chances are you will have the needed skills and tools in your workshop or garage already. There are a variety of reasons why people make their own furnaces. The most common reason is fulfilling a need. Many hobbyist and metal workers find out, to their dismay, that the local commercial foundries can not make the needed part or if they do, they feel the need to charge an outrageous sum. Not to mention the fact that the traditional methods of metal casting is quickly becoming forgotten as the industry turns to electric furnaces. So many hobbyists find that constructing their own furnace is an absolute necessity and a great way to preserve a piece of craftsman history. The artisans who use metal casting to create sculptures and other pieces find that making their own furnace grants them a greater amount of control over the entire process. This is actually how many people get into metal casting to begin with. Most likely, your first furnace is going to be a small and rather simple one. There is really no need to run before you can walk when it comes to something that will be using intense heat and melting iron which can be rather dangerous. Home made furnaces have been constructed from coffee cans to trash cans or sheet metal welded together. While there are a few components that really should be bought like the retractor to line the furnace walls which should be resistant to high temperature for a prolonged period of time along with special connectors and regulators, most of the furnace can be created in your own home. You should be able to find most of the components that you can not make at hardware stores or plumbing supply stores for relatively cheap. Along with the furnace parts you will also need to buy a crucible which will hold the metal as it melts along with the appropriate tools that you will use to handle the crucible. While you are at it you might as well buy all the safety equipment like gloves, protective eye wear, and leather shoes. There is other safety equipment that you will need depending on the type of work and the type of furnace you are going to make. Most likely, your first furnace is going to be a simple cupola variation. The cupola furnace which is going to resemble a smoke stack is a simple design and is relatively easy to make for anyone with mild craft skill. This type of furnace will not require a crucible since you will be able to pour the molten metal from the furnace itself into a ladle that can then be poured into the mold. DIY casting furnaces are a great way to connect yourself with your metal casting work giving you more control. While building the furnace can be complicated at first, once you delve into it you will find the experience enjoyable and fascinating.

Backyard Metal Casting

Kent Kelin asked:


Brass casting, as the name suggests, involves the use of brass as the molten metal. Brass casting can be carried out by the way of sand casting only. Sand casting can be defined as a ‘cast part’ produced by formation of a mold from a mixture of sand and pouring the casting liquid (mostly molten metal) into mold. Then the air-cooling of the mold takes place. After the solidification of metal, the removal of mold takes place. The metal used here is brass. It is a known fact that brass is an alloy of copper and zinc. Hence, to be precise, the molten metal consists of two elements.

Sand molding consists of two types- ‘Green sand’ molding and ‘air set’ molding. The first one consists of a blend of moisture, clay, silica sand and other additives. The second one makes use of dry sand bonded to all the above materials except moist clay, by the way of using an adhesive, which is fast curing.

At times, there is a placing of a temporary plug (in the mold cavity) to enable the formation of a channel to pour the fluid which is to be molded. The molds of the second type, i.e. the air-set molds result in the formation of a 2-part mold. The two parts are bottom and top. The tamping-down of the sand mixture takes place as it gets added. Many a times, the final assembly of the mold is vibrated to get the sand compacted and get the unwanted voids filled. Then the molten alloy (brass) gets poured into mold. After the solidification and cooling of brass, the separation of casting from sand mold takes place. Normally, such molds are one-time usable.

Patterns: A designer or an engineer provides the design of the object to be produced. On the basis of this design, a pattern is built by an efficient pattern maker by the use of plastic, metal, or wood. Polystyrene can also be used. The casting brass would get contracted during solidification. Non-uniformity can also result out of this. Therefore, the size of the pattern should be a bit larger as compared to the final product. ‘Contraction Allowance’ is the name given to this difference. Brass enters the mold cavity through a runner system including sprue and other feeders.

Molding box: A molding box having multiple parts (also known as casting flask whose bottom and top halves are called drag and cope respectively) is constructed for receiving the pattern. There may be an addition of sand to nullify the defects introduced due to the pattern getting removed.

Chills: To have a proper control over metallurgical structure and solidification of brass, plates of brass, or any other metal can be placed in mold. A hard structure may get formed at these places. Chills can be used for promoting directional solidification as well.

Design Requirements: The thing in making and the pattern corresponding to it should be designed in such a way that every stage of process can get accommodated. One should be able to take away the pattern without causing any disturbance to molding sand.

Hobby Metal Casting

Kent Kelin asked:


 
Metal casting is known and loved for the high temperatures, glowing molten metal, and the possibility to make nearly anything. Metal and their alloys are not the only things that can be used in casting. Casting in plastic, most notably resin casting, is becoming popular with artists and jewelers looking for something odd and unique. Resin casting does not involve the use of furnaces, crucibles, or casting sand. In fact all one really needs for resin casting is a mold, some resin (of course), and time. There are actually two forms of resin casting. The first kind is the one that more closely resembles metal casting, uses a mold and even gates and runners if it’s complex enough. The second type of resin casting is simply incasing an object in the resin. An example of this is using an ice cube tray and placing an object like a small pendant in one of the tray’s cavities and then filling it with the resin solution. After the resin dries you can pop it out of the tray. The pendant is now encased in hard plastic. This form is usually employed by jewelers and crafty moms but tends to be fun for everyone no matter age or experience. At the very least it’s a great way to get rid of some of the clutter around your house and disguise it as art. You can cast leaves, coins, and other objects in the resin to make anything from charms to magnets. Resin casting using mold is generally used by those who work with models and miniatures. Resin casting is a great way to make several pieces at once so you can avoid shelling out money you may not have and waiting several weeks for delivery of your items. Who has that kind of time anymore? Like metal casting, resin casting will require you to build a mold. If you are fortunate enough then you can easily find pre-made molds, especially if you are working with miniatures. If you don’t feel like buying these pre-made molds or just like doing things the hard way, then you will have to make the mold yourself. Don’t worry, it’s still fun. You will need to find a molding box this will hold the rubber that will be used to make the actual mold until it dries. Many who work with smaller objects find that working with toy building blocks to create this molding block work extremely well and will provide added convenience. A wooden box will work as well, of course. The box, or flask, will not have a top or bottom, just the four walls. Place molding clay at the bottom of the flask and insert your original. Make sure to add a way for the resin plastic to enter the mold. This cup or funnel should be placed at the top of the mold. You are going to prepare the silicone rubber and catalyst which will be used to create the mold. Follow the instructions on the labels since each type will vary. A process called degassing can be used which will remove all the air bubbles from the rubber. This is a fun process involving a vacuum pump. Slowly pour the rubber into the flask, covering the original. This can take up to a day to dry, so be patient. Remove the molding clay and repeat the process using the bottom part of the flask, or drag. You should have two parts now, with the original in the middle. When dry, remove the mold from the box and very carefully split the mold to remove the original. Place the mold back together and prepare the resin solution, follow the instructions to the letter. Pour the resin into the top of the mold, where you placed the cup. The set time for the resin should be stated on the bottle, but for most it will take up to 30 minutes. When ready crack the mold open and remove the cast. Resin casting can be a great family craft project but just make sure to follow all of the safety guidelines. This type of casting can still be dangerous even though you are not dealing with molten metals. Often times, the solutions and chemicals used in resin casting are poisonous if consumed. Not to mention that resin casting can be a bit smelly so working outside or in a well ventilated room is advisable.

Home Metal Casting

Kent Kelin asked:


 
Brass is a great metal to cast with as it can provide some really great looking results.  Many believe that brass, an alloy of zinc and copper, has been around since our prehistoric ancestors. Today brass is used for a multitude of products from coins to trumpets not to mention a whole bunch of other musical instruments. The low melting point makes brass a really great material for metal casting since even the smaller home grown furnaces can be used. By adding and subtracting alloys from bronze one can successfully make hard or soft bronzes. Aluminum and tin are sometimes added to bronze to create a layer that is not corrosive and very durable. Of course, for the home foundry users, playing alchemist isn’t really an option or necessary and scrap brass is perfectly acceptable in many cases. Locating scrap pieces of brass should be sufficient enough for whatever project you have in mind. Due to brass’ gleam and yellow shine, many artists will use the alloy for sculptures, jewelry, and other decorative items. Other metal casters may choose to use brass for general hardware needs or vintage car restoration, and of course, whatever else they may choose. Generally there are three casting methods that prove to be suitable for brass casting. Metal casters may choose to experiment with different methods and should not allow themselves to be limited. Lost Wax casting is usually associated with bronze casting but can also be used for brass and for really any other metal. By using a wax model and covering it with a ceramic shell, artisans are able to inject the molten alloy which replaces the wax. Chipping away the shell will reveal the brass piece. Lost wax casting is used when a high attention to detail is needed. Artists or metal casters looking to create decorative brass pieces or sculptures will find that the lost wax casting technique will meet their needs far better than other techniques and methods. Die casting is yet another method used for brass casting. Die casting is normally used in commercial foundries since the initial start up cost is undesirable for the smaller home foundries. By using a reusable mold created from steel, the caster will be able to create scores of identical products. Die casting with brass should be used if the caster or artists is planning to make multiples of one product and can find a viable market for those pieces. Sand casting is probably the oldest type of casting and is still a popular method especially for small foundries. The brass is poured into sand molds and can create a unique look which may be preferred for the artisans. Sand casting tends to be the most economically sensible for small foundries and if the casting does not have to be incredibly attractive then this method is preferable for many. Whichever casting method is used for casting the brass really depends on the individual. Many find that casting brass to be fun and easy since it does melt rather easily. A large expensive furnace is not a requirement when casting brass so first timers using small home made furnaces will find this alloy attractive. Many have even been able to melt brass in small ceramic pots using charcoal! Some ideas of what to make with brass include candle holders, plumbing fixtures, and even musical instruments.

Metal Casting

Kent Kelin asked:


 
Metal casting is known and loved for the high temperatures, glowing molten metal, and the possibility to make nearly anything. Metal and their alloys are not the only things that can be used in casting. Casting in plastic, most notably resin casting, is becoming popular with artists and jewelers looking for something odd and unique. Resin casting does not involve the use of furnaces, crucibles, or casting sand. In fact all one really needs for resin casting is a mold, some resin (of course), and time. There are actually two forms of resin casting. The first kind is the one that more closely resembles metal casting, uses a mold and even gates and runners if it’s complex enough. The second type of resin casting is simply incasing an object in the resin. An example of this is using an ice cube tray and placing an object like a small pendant in one of the tray’s cavities and then filling it with the resin solution. After the resin dries you can pop it out of the tray. The pendant is now encased in hard plastic. This form is usually employed by jewelers and crafty moms but tends to be fun for everyone no matter age or experience. At the very least it’s a great way to get rid of some of the clutter around your house and disguise it as art. You can cast leaves, coins, and other objects in the resin to make anything from charms to magnets. Resin casting using mold is generally used by those who work with models and miniatures. Resin casting is a great way to make several pieces at once so you can avoid shelling out money you may not have and waiting several weeks for delivery of your items. Who has that kind of time anymore? Like metal casting, resin casting will require you to build a mold. If you are fortunate enough then you can easily find pre-made molds, especially if you are working with miniatures. If you don’t feel like buying these pre-made molds or just like doing things the hard way, then you will have to make the mold yourself. Don’t worry, it’s still fun. You will need to find a molding box this will hold the rubber that will be used to make the actual mold until it dries. Many who work with smaller objects find that working with toy building blocks to create this molding block work extremely well and will provide added convenience. A wooden box will work as well, of course. The box, or flask, will not have a top or bottom, just the four walls. Place molding clay at the bottom of the flask and insert your original. Make sure to add a way for the resin plastic to enter the mold. This cup or funnel should be placed at the top of the mold. You are going to prepare the silicone rubber and catalyst which will be used to create the mold. Follow the instructions on the labels since each type will vary. A process called degassing can be used which will remove all the air bubbles from the rubber. This is a fun process involving a vacuum pump. Slowly pour the rubber into the flask, covering the original. This can take up to a day to dry, so be patient. Remove the molding clay and repeat the process using the bottom part of the flask, or drag. You should have two parts now, with the original in the middle. When dry, remove the mold from the box and very carefully split the mold to remove the original. Place the mold back together and prepare the resin solution, follow the instructions to the letter. Pour the resin into the top of the mold, where you placed the cup. The set time for the resin should be stated on the bottle, but for most it will take up to 30 minutes. When ready crack the mold open and remove the cast. Resin casting can be a great family craft project but just make sure to follow all of the safety guidelines. This type of casting can still be dangerous even though you are not dealing with molten metals. Often times, the solutions and chemicals used in resin casting are poisonous if consumed. Not to mention that resin casting can be a bit smelly so working outside or in a well ventilated room is advisable.

Foundry

Kent Kelin asked:


Some of the casting supplies are described below.

Cast cutters and blades: There are two varieties of cast cutter blade for plaster casts – 2 inches and 2.5 inches. This comprises of one blade and in most of the cutters, stainless steel blades fit in. This has a maintenance free operation and is comfortable to use. There is a high torque motor and an ON / OFF switch. The Cast cutter blade for synthetic casts is also available in two sizes – 2 inches and 2.5 inches. This has the same features as mentioned above. The Hercules Plaster Shears 7.5 inches is a Hercules heavy duty bandage and plaster shears 7.5 inches (19.1 cm) and has a serrated blade. The Cast cutter heavy duty with metal housing consists of one 2 inches fiberglass blade. In most of the cutters, a stainless steel blade can be fitted. The length is 12.5 inches and weight is 3 lbs 13 oz. This is specially lubricated for greater service and more comfort. The heavy duty can be used in both clinical use and fabrication setting.

Cast padding: The specialist casting padding 3 inches X 4 yards is made up of micro pleated cotton fabric that stretches more than 50 percent. There is no need to tear and tuck for a smooth and comfortable fit. This is also available in sizes of 4 inches X 4 yards as well as 2 inches X 4 yards. The Sof Rol padding 3 inches X 4 yards is made of 100 percent surgical grade rayon. This is also available in sizes of 2 inches and 4 inches X 4 yards.

Cast splinting materials: The orthoplast II splint material plain is available in size of 18 inches X 24 inches X 1/8 inch. The setting time is 3 to 4 minutes. The finished splints can be butt bonded, hinged, bonded, strapped and riveted. There is a wax coated surface. This is self adhering when heated. This is majorly designed for upper extremities. It is perfect for hand splints. It moulds as per the contours of the body without any wrinkling. The orthoplast splinting material plain is available in sizes of 18 inches X 24 inches X 1/8 inch. This is made of a low heat thermo plastic material and is highly comfortable. After this material is heated, it can be molded or cut to any shape and adheres to itself. This material can be butt bonded, hinged, bonded, strapped and riveted. This can also be used in cylindrical casting procedures.

Heat gun: This is of two types – heat gun and master heat gun 220 volt.

Splinting pans: The forma splint 14 inches X 10 inches is an extremely compact and lightweight design. So, it is perfect for small splinting needs or for varying spots. This has a stainless steel working tank of dimensions 13 inches X 9.5 inches X 1.25 inches. This has a lexan cover. Water is maintained at controlled temperatures by a variable temperature thermostat between 150 degrees Fahrenheit and 190 degrees Fahrenheit. There is a high heat safety switch and grounded hospital grade plug. The empty weight of this device is 5.5 lbs. It heats to the required temperature in only 15 minutes.

Brass Metal Casting