Metal Casting Zone Info Blog

Posts Tagged ‘Neck’

What you Need to Consider in your Search for a Chiminea

The tribesmen back in Mexico, during the 17th century, introduced to the world of fire pits and fire places a new structure that served the same purpose. Its characteristic long neck attached to the rounded bottom resembles a chimney and serves a similar purpose there as well. It is an outdoor fireplace that can also be used to grill skewers and cook meat. When not in use they are an ornamental addition to the garden or patio. These are normally made up of clay, aluminum and cast iron. You must know some facts about chimineas before deciding the kind of chiminea that would be apt for your backyard or other outdoor living space.

When it comes to choosing clay chimineas it sure does sound like a pretty good idea because that is how traditional chimineas used to be.  And when used for cooking it produces a lot of heat and its temperature raises high in a short span of time. The food cooked in these clay chimineas may have a different flavoring as well that comes in with the mixture of charcoal and clay particles. These clay chimineas can be either air-dried or kiln-dried. The air-dried version is generally the untreated version and may need some painting to be done to completely coat and seal it. The kiln-dried versions do not require any extra touch ups. The clay chimineas are weakly bound at the neck of the structure i.e. the junction between the end of the round bottom and the start of the neck-like structure so it is not advisable to carry the chimney at the neck.

Metal chimineas as compared to clay chimineas are way better with a lot of advantages over their clay counterparts. Metal chimineas are considerably stronger and more durable. They cannot be easily damaged or broken like the clay chimineas. They do not allow seepage of water into their bodies unlike clay chimineas and thus do not have the limitation of not being able to use in moist surroundings. They also conduct heat very efficiently. However, all the burning activity might give rise to rust on the metal body which needs to be maintained every now and then. Even then the rusty body gives it an antique look and it only enhances its presence as an attractive show piece.

Another thing to be considered is the size of the opening for the fuel inlet. It should be large enough to easily accommodate wood pieces of variable sizes. So it would be productive if you choose a chiminea with a larger bottom. You can also purchase a spark arrester which is a mesh like structure that can be used to cover the opening at the top of the chiminea or at the opening at the bottom. This would prevent sparks from escaping outside and damaging the surrounding. In all, it is a great addition to your backyard with all its uses and its heating properties.  Chimineas are a great addition to any outdoor living space.

Benefits Of Cast Iron Crockery

Cast iron is one of the most commonly used materials when it comes to the manufacture of kitchen items. Cast iron teapots are to die for especially since tea is one of the most commonly brewed beverages. However, most people would opt to buy a cast iron kettle since it is more functional and you can use it to brew a number of other beverages and soups such as coffee, cocoa, chicken soup, mushroom soup among others.

Most crockery made from this iron has a number of benefits and advantages over other materials. This is the main reason why these products have been in use for generations all over the world. Indeed, there is no other material that is more time – tested than this type of iron.

First of all, such crockery comes in a variety of forms. You can get gray iron crockery, ductile crockery, compacted graphite crockery, malleable iron crockery and even white iron crockery. This means that you can never exhaust the types of material you can have your crockery made from.

The other advantage of this class of crockery is that it is very affordable. This iron is highly available hence you can get your crockery at prices which are much lower as compared to those made from other material such as aluminum, steel and (inevitably) silver. You will also reduce the cost of your crockery in the long run since iron that is cast is very durable therefore you will not have to worry about constantly replacing your crockery.

Crockery made from casted iron will also save you a lot of time and money since this type of iron has a very low density. It also has the highest thermal conductivity. This means that you will not have to use too much heat in order to brew your beverage. Therefore, you will be able to spend less time cooking and even less energy. This will save you a lot of money.

It is also possible to get a wide variety of such kettles. You do not have to stick to the conventional and traditional shapes of kettles. Since iron that has been cast is very malleable, there is no limit to the shapes that your kettles can take. From cartoon shapes to other funky proportions, you are sure to have fun in your kitchen with these oddly shaped pieces. The sizes will also vary, so you can purchase some extra large crockery made from this iron for cooking for many guest or some tiny one for your own personal use. You can also get some elegantly shaped classic teapots made out of this material.

Finally, your beverage will never stick to a Tetsubin cast iron teapot. This will give you the easiest time as you serve your drinks and wash the dishes later. It is also unbreakable, so you should not worry too much even if you have young children in the house.

Prototal Reduced Neck Taps – High-Speed Spiral Point Reduced neck taps for machine tapping applications. Reduced neck maximizes coolant flow in machine tapping application for ferrous and non-ferrous materials. Excellent for aluminum, magnesium, malleable cast iron and stainless steel materials. Hi-Molybdenum tool steel, gold treated for maximum lubricity, reduced neck provides maximum torsion strength for machine tapping applications. www.prototal.ca
Video Rating: 0 / 5

I need to make faux bronzes of my chest and neck for jewelry displays .I want to be able to make a mold to cast the busts and then do the faux bronzing.